Material Flame Test Machine
IEC60529 IPXX Test Equipment
Household Safety Appliances
Wire Cable Test Machine
Mechanical Strength Tester
Accessibility Probes ,Fingers
Universal Testing Machine
Environmental Test Chamber
IEC62368 Standard Tester
VDE0620 Test Gauges
UL498 Test Gauges
IEC60061 Test Gauge
Withstanding Voltage Tester
Switch Life Tester
EMI EMC Tester
Plug and Socket Test Gauges
Toy tester
Freezing Load Test Package
Concrete Test Hammer
Battery Tester
Contact Us
Telephone：0086-(0)755-26978980
Email：Sales@hkauto.com.cn
Address:4F, I Building, Huafeng High Tech Industry Zone, Shajing Town, Baoan District, Shen Zhen City,P.R.China. Zip Code:518104
Mark Abrasion Tester
Description:Mark Abrasion Tester
Application
Technical Parameter
Reference Standards
Introduction of The Equipment:
1. Motor speed controller, which is used to adjust the speed of friction.When it is used for the first time, the user should record the time with a stopwatch while adjusting the speed to make the friction frequency approximately be moving 12 times in 15 seconds. Fix the location after the speed adjustment and use it directly at the next time.
2. Counter, which is used to record the number of times of friction. Users can set the number of times of friction and the system will stop automatically when it reaches the number of times that set before;
3. The general switch of the equipment;
4. The start testing switch.The equipment can’t start with full testing times if the number of times is not be reset;
5. The stop testing switch;
6. The pressure counterweight weight. The pressure of the friction wheel is 750g if the weight is used and the pressure of friction wheel is 250g without the weight.
7. Pressure Weight rack locking screw. The pressure of friction can be adjusted when moving this device;
8. Friction wheel.Please wrap it up with a piece of white flannel when testing.
* necessaryOnline Message：
